Suburban Mfg 12155-00-DRDRAA User Manual download pdf (Page 30)

26 SSCI - Suburban Surgical Company, Inc.

Chapter 4 - Repairs and Replacements

The following instructions cover both the seal strip retainers and the

seal strips. All seal strip retainers are the same except for length and

number of mounting holes. The same is true for all seal strips.

Parts Identification

Table 3 on Page 27 and Table 4 on Page 28 give the part numbers

for the various seal strip retainers and seal strips.

Note: The dimensions refer to the door/cage size, and not to the

actual lengths of the retainers and seals.

Tools Required

 3/8 in. box-end or open-end wrench

 Phillips screwdriver

Procedure

Note: You do not have to remove the door from the cage to

replace a seal strip retainer or a seal strip.

1. Open the oxygen therapy door.

2. With a 3/8 in. wrench and a Phillips screwdriver, remove

the mounting nuts and screws (Figures 29 and 30) that hold

the seal strip retainer and seal strip to the door.

Note: The number of mounting screws/nuts varies with the

dimensions of the door.

Seal Strip Retainer

and Seal Strip

Refer to Tables 3 and 4 for

Part Numbers

3. Lift off the seal strip retainer.

4. If you are replacing the seal strip, remove it at this time.

Figure 29. Outside View - Seal Strip and

Retainer Mounting Screws

Seal Strip

Mounting Screw

Figure 30. Inside View - Seal Strip

Retainer and Seal Strip

Mounting

Nut

Seal Strip

Seal Strip Retainer

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Suburban Mfg 12155-00-DRDRAA User Manual Page 30